F130 GASLESS FLUX CORED WIRE FEED WELDER
IGBT Inverter Technology - Compact by design
- > Ready to burn 0.035 wire, superior to other 0.030 wire welders in the market.
- > Welds 18-gauge mild steel up to 1/4 inch in single pass with maximum 130A output.
- > Fine-tune arc with step-less heat control, outperforms fixed setting in transformer welders.
- > Very easy to setup and use with zero learning curve benefit from its Side-Load spool and highly integrated design.
- > Cutting-edge inverter technology saves 25% energy bill with more than 80% efficiency.
- > Safety features to protect your family and household.
Protection with indicator light
Built-in temperature, voltage and current sensors provide maximum protection for operator and machine.
Highest open circuit voltage in the class
Delivers outstanding arc strike performance on dirty surface with un-matched 46 volt OCV, nearly two times higher than transformer welders.
Reliability is always guaranteed
- > Moisture-proof design.
- > Salt spray-proof design.
- > Corrosion-proof design.
Infinite Voltage, Infinite Wire Feed,
- Unlike to its transformer-based counterparts, F130 features an continuous voltage control that allows you to fine tune the voltage independently of the wire feed speed. Use the control to gain more freedom in making the weld puddle perform the way you want it to. Dial out spatter or control the weld puddle while welding overhead. Infinite voltage control puts total control of the welding arc in your own hands, allowing you to get the results you want.
Rugged Wire Feeding System
- > Side load spool design normally used in professional MIG welding machine.
- > Precision full-adjustment drive system reduces chance of wire tangling.
- > Durable gear box delivers added drive torque and quiet operation.
Advanced inverter technology provides outstanding welding performance
Delivers the same brute power as its transformer-based counterparts, but at lower electricity costs.
Unprecedented 46V open circuit voltage make it is extremely easy to start arc at exceptional smooth arc ignition at rust surface.
Forgiving arc makes dialing in your application easy, excellent out-of-position arc stability, low spatter and a wide voltage sweet spot.
- Duty cycle
- Maximum amperage output
- Minimum amperage output
- Open circuit voltage
- Spool size
- Welding wire
- Welding capacities
- 120 volt, single phase, 60Hz
- 15% @ 90 amps, ambient temperature 170F (40°C)
- 130 amps
- 50 amps
- 46 volts
- Tweco 11-35 tip, Lincoln style black nozzle for flux cored wire
- 4 inches
- 035 inch steel flux cored wire
- 24-gauge mild steel, up to 1/4 inch
- Ideal for beginners, home maintenance/renovation and auto repair
- 13.8 x 7 x 7.5 inch
- 10.8 lb
Package come complete with
Easy 4 steps for return and replacement
This product is covered by
one year free replacement warranty!
Contact customer service.
Receive prepaid return label through email.
Drop off to any UPS location.
Wait for the refund or replacement.
KickingHorse® vac-pac E71T-11 flux-core wire steel 035, 2 LB spoolKickingHorse® vac-pac E71T-11 flux-core wire steel 035, 2 LB spoolRegular price $17.99Sale price $17.99 Sale
Contact Tip 035 (0.9mm) Tweco Style, 10pc / bagContact Tip 035 (0.9mm) Tweco Style, 10pc / bagRegular price $14.99Sale price $14.99 Sale
1 (one) Year Extended Warranty for KickingHorse® Welders1 (one) Year Extended Warranty for KickingHorse® WeldersRegular price $69.00Sale price $69.00 Sale
Flux Cored Nozzle for F130 Torch, 1pcFlux Cored Nozzle for F130 Torch, 1pcRegular price $7.99Sale price $7.99 Sale
QUESTIONS & ANSWERSAsk a Question
Why F130 burns 035 (0.9mm) flux cored wire, but other similar welders in the market capable of 030 (0.8mm) wire only?
The secret is the 40K Hz highest efficiency in-class IGBT inverter module built in the unit. The High performance inverter generates more current with the same limited power available at US residential household.
Can I use 0.30 or 0.23 wire for some auto work?
KickingHorse® F130 home flux core welder can use 030 wire, you need:
(1) Flip the drive roller to 030 groove.
(2) Install Lincoln (tweco) 11-30 tips which is available in Home Deport and other tool store as well as Amazon.
This unit can not use 023 flux core wire. Actually 023 is very rare for flux core because of the difficulty of manufacturing.
What size generator will run this unit? What type of extension cord can I use with this welder?
F130 flux core welder would require a generator that features a minimum rated wattage of 3,000 watts. This unit is intended to be used with a 20 amp 115 volt AC circuit without the use of an extension cord. If one is used it must be rated for 20 amps for the entire length of the cord and cannot be any longer than 25 feet.
Does it have US safety approval? What happens if I use non - certified welder in US?
KickingHorse® F130 home flux core welder is UL certified mig welding inverter and is safe and legal to weld both on-site and in house. In United States, before decide to purchase any welding machine without UL certification, you must consider not only the safety of the employees, your family members and properties, but also the legal, financial and insurance consequence may face by using non-safety approval equipment, no matter at work place or in home.
The Fines for Non-Compliance are Very Heavy in US!
Is galvanized steel okay to weld? Need this to assist in building a tiny home/repairing the trailer will it be sufficient?
It's not a good idea to weld galv steel. You should weld the steel first then have it galvanised. Or if you have no choice and it is already galvanised then grind the galvanising off in the area you wild weld and paint with cold galv after welding.
Can this weld thin metal? 1/8 inch?
Yes, it can weld pretty thick steel, as I work at a steel shop and hamdle steel all day I was surprised how thick, with proper prep and skill you could weld half inch, when welding 1/8- 1/4 or more you need to crank the voltage up high but it’s a nice little welder, super light too.
Can I use stainless steel flux wire to weld with this machine?
You can weld any flux core wire with KickingHorse® F130 home welder as far as the wire does not need gas and does not use DCEP polarity. Consult to the wire manufacture specification first.